Computer Suddenly Turn Off and Then Turn Back On, Lets Check What Happen.

This is an article about the little things that happen on the computer. Small and simple. But the impact? Do not ask! The proof, a few people who come asking for help because this minor damage is turned pretty troublesome.

Well, maybe we do not think that a button on a computer casing will be a big problem. And just sharing this article to you who have experienced this in order not spending out of money to call a technician ... hehe

Various Damage on Power and Reset Button

There are two kinds that caused damage to the power and reset buttons, the first button is stuck and could not return. Generally, power button and reset at this time using a switch with push model, the button is pressed and then return to its original position. Differences with the old key with the switch on method, the button does not return to its original position. As a result of damage to the switch, as well as dirt contained in the switches, buttons often can not be turned back to its original position. This is the first damage to the power and reset buttons. And the second is a disconnected from the switch to cable.

A result of the Power and Reset Button that damaged

1. When button stuck, the power button results in computer-lived and died not much later. This is due to the current motherboard model use push the switch to power on. And to force the computer to turn off by pressing the button long time (a few seconds). With stuck buttons damage, motherboard as if forcibly turned off.
2. When the reset button stuck, then your computer will not turn on! This is due to your motherboard in reset position continuously.
3. When the key is disconnected with the motherboard, then if it occurs on the power button of course, as a result, the computer will not be turned on. In the reset button, if this happens only lead to a computer can not be reset.

How to fix

Damage to the power button that gets stuck, usually caused by impurities contained on the power button. Open button, and clean. It may also happen with stuck button or too narrow hole that may be caused by expansion. cut a bit key, until a little loose on the position of the hole.

On the power button that disconnected with the motherboard, either because of cable damage, or damage to the switch, replace switch or cord. To mark whether the damage is due to the switch/button, you do a test by directly turning on the computer by connecting pin power switch located on the motherboard. When the computer cannot turn on by switching the power button, and if this way you can turn on your computer, meaning you switch must be replaced!